Image shown may not be actual product
Burks 10CS5M-FE Close Coupled Turbine CS Series Pump w/Franklin Electric Motor, Bronze Fitted, 1HP, 115/208-230 Volts, Single Phase, 3450 RPM, ODP - Open Drip Proof Motor Enclosure, Bronze w/ Monel Blades Impeller, Carbon / Ceramic / SS Buna-N Seal with a Maximum Temperature of 225°F (107°C) - Standard Buna-N Seal. Manufactured by Crane.
Burks 10CS5M-FE Close Coupled Turbine CS Series Pump w/Franklin Electric Motor, Bronze Fitted, 1HP, 115/208-230 Volts, Single Phase, 3450 RPM, ODP - Open Drip Proof Motor Enclosure, Bronze w/ Monel Blades Impeller, Carbon / Ceramic / SS Buna-N Seal with a Maximum Temperature of 225°F (107°C) - Standard Buna-N Seal. Manufactured by Crane.
Capacities (GPM) | 32.5 |
Casing Material | Cast Iron |
Casing Working Pressure | 250 |
Discharge NPT (Inches) | 1 |
Frame Material | Cast Iron |
Heads To (Feet) | 350 |
HP | 1 |
Hz | 60 |
Impeller Material | Bronze w/ Monel Blades |
Inlet Pressure (PSI) | 100 |
Material | Bronze Fitted |
Motor Enclosure Type | ODP - Open Drip Proof |
Motor Shaft Material | 303 Stainless Steel |
Part Number | 10CS5M-FE |
Phase | 1 Ph (Single Phase) |
Product Notes | w/ Franklin Electric Motor. Compare to MTH Pumps Model: T51E-BF-1-HP-1-PHASE-3500-RPM-ODP |
Raceway Material | Bronze |
Shaft Seal Material | Carbon / Ceramic / SS Buna-N |
Speed (RPM) | 3450 |
Suction NPT (Inches) | 1-1/4" |
Voltage | 115/208/230 |
General Description |
---|
Burks CS Stainless Steel Series - Regenerative Turbine Pumps, Close Coupled |
Materials of Construction |
Frame - Bronze Fitted: Cast Iron, All Bronze: Bronze, Stainless Steel: #316 Stainless. Case - Bronze Fitted: Cast Iron, All Bronze: Bronze, Stainless Steel: #316 Stainless. Impeller - Bronze Fitted: Bronze, All Bronze: Bronze, Stainless Steel: #303 Stainless. Raceway - Bronze Fitted: Bronze, All Bronze: Bronze, Stainless Steel: #303 Stainless. Shaft: #303 Stainless Shaft Seal: Carbon Ceramic SS Buna-N |
Motors |
Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with buitin overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty. |
Factory Tested |
Every pump factory tested |
Motor Information |
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM Three Phase motors are 208-230/460 Volt, 60/50 Hz, 1750/1450 RPM CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 1 1/2 & 2HP - 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP - 208-230/460 Volt, 60 Hz, 3450 RPM |
Jacketed Seal Cavity |
For Temperature to 500°F (260°C) - Series CS Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix “J” to pump catalog number for temperatures below 400°F (204°C) and add suffix “JK” to pump catalog number for temperatures over 400°F (204°C). Example: 15CS5MJ. |
Boiler Feeds
1769 productsCirculation
1769 productsCondensate Return
1769 productsCooling Tower
11343 productsHigh Temperature
1769 productsLiquid Transfer
2494 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.