32 Series Motor Speed Product Line Cast Iron Internal Gear Pumps
Viking’s Motor Speed Product Line internal gear pumps are extremely well suited for light, medium and intermittent service handling a variety of liquids.
The smaller sizes C, F, FH are constructed for heavier duty service. Mechanical seal equipped pump models in sizes C, F, FH, G, H, HL are available with Underwriters label for handling fuel oil. Model numbers for these pumps must be designated by a suffix -X. UL listed models can be equipped with in tegral relief valve. Viking’s unique and unusually simple pump con struction makes it adaptable to many diversified in stallations.
The pumps possess excellent vacuum characteristics and will operate and prime at suction lifts up to 25 feet, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churn ing, the Viking pump is adaptable to an unlimited number of industrial applications.
• Relief Valve on Casing or Head: The integral pressure relief valve on casing or head permits by-passing of liquid from discharge back to suction side of pump. Reverse valve when reversing pump rotation on large pumps. Small pumps with relief valve built with right hand suction as standard.
• Steam Jacketed Head: Jacketed head or plate permits temperature control of the liq uid being pumped. Jacketed plate available on G through LL size pumps. Jacketed head available on Q through N sizes. Relief valve not available with jacketed head or plate. For complete jacketed pumps, refer to Catalog Section 1464.
• Upright, Opposite & Right Angle Ports: C, F and FH size pumps are furnished with upright port casings: G size pumps have opposite port casing and H, HL, K, KK, L, LQ, LL, Q, M, N size pumps have right angle port casings. Right hand port determined by location of side port when fac ing pump from shaft end.
• Mechanical Seal: All pumps are available with packed stuffi ng boxes. Mechanical seals are available on C, F, FH, G, H, HL size pumps as standard. The seal is a rotary type packaged unit that is simple and self-adjusting. It works WITH rather than against pressure.
Specifications
Capacity: 0 to 450 GPM, 0 to 102 m³/h
Viscosity: 31 to 250,000 SSU, 1 to 55,000 cSt
Pressure: to 250 PSI, to 17 Bar
Temperature: -60 to +450 °F, -50 to +230 °C
Porting: Opposite (180°) Right Angle (90°) Flanged NPT
Drives: D Direct-Mounted Drive, B Bracket Mounted Drive, R Offset Gear Reducer Drive, V Drive | V-Belt Drive
Mounting: Foot Mount
Sealing: Packing
