131-00136-0000

1. Space-Saving "Valve-Style" Installation

The defining feature of the PWA-IL is its vertical in-line configuration.

• Small Footprint: It installs much like a valve, requiring significantly less floor space than a traditional horizontal pump and baseplate.

• Reduced Piping Costs: Because the suction and discharge flanges are on the same centerline, you don't need the complex "S-turns" or specialized elbows required for horizontal pumps. This can save thousands in initial piping installation.

2. Simplified Maintenance (Back Pull-Out)

Despite its compact design, the PWA-IL does not compromise on serviceability.

No Pipe Disturbance: It features a "Back Pull-Out" design.This means your maintenance team can remove the motor, power frame, and impeller for repair without ever touching the pump casing or disconnecting the piping.
 

Self-Venting: The centerline discharge makes the pump naturally self-venting, which prevents air binding—a common headache in vertical piping systems.

3. Superior Material Standards

PumpWorks provides the same premium upgrades for the In-Line series as they do for their horizontal pumps:

Carbon Steel Casing: While many in-line pumps use cast iron, the PWA-IL comes standard with ASTM A216 Carbon Steel. It offers better pressure containment and is fully weld-repairable.
 

316L Stainless Steel Shaft: Standard at no extra cost, providing excellent corrosion resistance and preventing the "shaft-to-sleeve" rust bonding common in lower-grade steels.

5-Year Unconditional Warranty: Every PWA-IL is backed by an industry-leading warranty on the power frame, regardless of the cause of failure.

4. Technical Considerations for the Buyer

Before purchasing, verify these three critical factors:

Motor Support: The PWA-IL uses a high-strength carbon steel motor support with a machined registered fit. This ensures the motor and pump are perfectly aligned—eliminating the need for tedious manual alignment in the field.

Sealing Flexibility: The seal chamber is designed to accommodate almost any mechanical seal configuration (Single, Dual, or Component) and supports the full range of CPI seal flush plans.

Vertical vs. Horizontal Hydraulics: While the PWA-IL meets ANSI B73.2 standards, ensure your flow and head requirements align with vertical performance curves, which can differ slightly from the horizontal B73.1 equivalents.

PWA-IL Selection Summary

Would you like me to help you compare the dimensions of the PWA-IL against a standard horizontal PWA to see exactly how much floor space you could save?

Test Flows: Up to 7,500 GPM

Discharge Test Pressures: Up to 740 PSI

Supply Tank Rating: Full vacuum to 65 PSI

Electrical Capacity: 460 volt through 500 HP, 3600 RPM

Variable Frequency Drive (VFD): Precise speed control through 500 HP @ 460 volt

Chemical/Petrochemical, Pulp and Paper, Food and Beverage, Oil and Gas, Primary Metals Manufacturing, Mining, Power Generation, Waste Treatment & General Industrial