PumpWorks ANSI Pump Repair Parts & Kits
PumpWorks provides a comprehensive ecosystem of ANSI Pump Repair Parts and Kits designed to be 100% interchangeable with industry standards like the Goulds 3196 and Durco Mark 3. Their philosophy is simple: Upgrade the material, simplify the ordering, and reduce the downtime.
Here is everything you need to know about their parts and kitting strategy.
1. The "Standard Upgrade" Philosophy
The biggest advantage of PumpWorks repair parts is the material quality. While other OEMs default to ductile iron, PumpWorks parts are engineered from High-Strength Carbon Steel as the baseline.
Weldability: Unlike brittle iron parts, these carbon steel components can be weld-repaired in the field.
Safety: Better impact resistance and pressure containment in extreme temperatures.
Interchangeability: You can install a PumpWorks Carbon Steel part onto your existing Goulds or Durco pump without any modifications.
2. Types of Repair Kits
To avoid the headache of tracking dozens of individual part numbers, PumpWorks organizes repairs into three main tiers:
A. Liquid End Kits (The "Wet End")
Everything needed to refresh the pumping side of the unit.
Includes: Casing, Impeller, Seal Chamber/Cover, Gaskets, and all related Hardware.
Best for: Pumps with internal corrosion, erosion, or catastrophic casing/impeller damage.
B. Power End Kits (The "Drive End")
Everything required to rebuild the mechanical heart of the pump.
Includes: Power Frame, Shaft (Standard 316L SS), Bearings (L-10 life rated), Flinger Disk, and Oil Seals/Sight Glasses.
Best for: Bearing failures, shaft run-out issues, or high-vibration scenarios.
C. Maintenance Kits (The "Soft Goods")
The essential consumables for routine service.
Includes: O-rings, Gaskets, Shims, and Bearings.
Best for: Scheduled preventative maintenance or seal replacements.
3. Key Component Highlights
Shafts: Upgraded 316L Stainless Steel is standard (compared to the 4140 steel used by others), providing superior corrosion resistance at no extra cost.
Bearings: High-capacity bearings designed for an increased L-10 life, supported by a finned bearing frame for better heat dissipation.
Seal Chambers: Available in Standard, Tapered, and Big Bore configurations to fit any mechanical seal (Single, Dual, or Component).
4. When to Use These Kits?
| If you are experiencing... | Use this Kit: |
| Drop in flow or pressure | Liquid End Kit |
| High vibration or "noisy" bearings | Power End Kit |
| Leaking at the shaft or gaskets | Maintenance Kit |
| An emergency "Critical Spare" need | Complete Rotating Element |
5. The "ePOD" Advantage
PumpWorks leverages technology to make finding parts easier. Their ePOD (Electronic Pump On Demand) software allows you to:
Input your current pump model (even if it's a competitor's).
Instantly identify the matching PumpWorks interchange parts.
Download data sheets and performance curves for the replacement components.
The Competitive Advantage
Every Power End component is backed by PumpWorks’ 5-Year Unconditional Warranty. If you rebuild your pump using a PumpWorks Power End Kit, you are securing the best protection in the industry.
