Pulsatron Model LC44B1-PTC1-B42 Metering Pump, Series T7, 48 GPD @ 50 PSI, Single Manual Control, 115 VAC, FPP/TFE/CDBL.38T
|Connections / Discharge (Inches)||Tubing 3/8" OD|
|Diaphragm||PTFE faced CSPE|
|Discharge NPT (Inches)||.25" x .38"|
|Flow Control||No Options Available|
|Flow Rate LPH||7.6|
|GPH Flow Limitations (250 SPM)||0-3.76|
|GPH Flow Limitiatiaon||0 - 1.88|
|Head / Fittings||GFPPL|
|Liquid End Configuration||GFPPL / TFE / Ceramic|
|Maximum Flow (GPD)||48|
|Maximum Flow (GPH)||2|
|Maximum Pressure (PSI)||50|
|Maximum Viscosity (CPS)||1000|
|Pressure Rating BAR||3.3|
|Suction NPT (Inches)||.25" x .38"|
|Turn Down Ratio||0.417361111111|
|Valve / Seat / O-Ring||Teflon®|
|Viscocity||1000 up to 3000 cps w / SS balls|
|Features & Benefits|
|Single Manual Control and 7-Day Timer: Stroke length is manually adjustable, stroke frequency is fixed. In timer mode, pump is controlled by 7-day programmable timer. 10:1 max turndown.|
Pulsatron Series T7 Chemical Metering Pump by Pulsafeeder
• Complete Timer Control in one unique package.
• Solid State 7 Day Electronic Timer. Program up to 8 On/Off Events Per Day
• Highly Reliable timing circuit.
• Isolated from Earth Ground.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Reliable metering performance.
• Rated "hot" for continuous duty.
• Leak-free, sealless, liquid end.
|Pulsafeeder PULSAtron PLUS Series T7 chemical metering pumps are positive displacement, diaphragm type pumps with Integrated Feed Control with 7-Day Programmable Timer. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron PLUS Series T7 pump was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The Series T7 provides everything you need in one simple and cost effective metering system for timed applications. The Series T7 is controlled by a 7-day programmable timer. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous 'ON' mode and the ability to adjust the stroke length from 0-100%. There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment.|
|Adjustment is by means of readily accessible dial knob for changing stroke length (stroke frequency is fixed) and solid-state 7-day electronic timer for setting metering schedules. The knob is located opposite the liquid handling end. The timer located above the knob on top of the pump|
|The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.|
|Materials of Construction|
|Engineering Data - Materials|
|Pump Head Materials: GFPPL, PVC, PVDF, 316 SS|
Diaphragm: PTFE-faced CSPE-backed
Available Seat O-Rings: PTFE, CSPE, Viton
Available Ball Types: Ceramic, PTFE, 316 SS, Alloy C
Available Fitting Material: GFPPL, PVC, PVDF
Bleed Valve: Same as fitting and check valve selected (except 316 SS)
Available Tubing: Clear PVC, White PE
Important Material Codes:
GFPPL = Glass-filled Polypropylene
PVC = Polyvinyl Chloride
PE = Polyethylene
PVDF = Polyvinylidene Fluoride
PTFE = Polytetrafluoroethylene
CSPE = Generic formulation of Hypalon, a registered trademark of E.I. DuPont Company.
Viton is a registered trademark of E.I. DuPont Company.
PVC wetted end recommended for sodium hypochlorite.
|• Manual Stroke Rate|
• Manual Stroke Length
• External Pacing - Optional
|No Options Available|
|Engineering Data - Tech|
|Reproducibility: +/- 3% at maximum capacity|
Stroke Length Turn-Down Ratio: 10:1
115 VAC / 50-60 HZ / 1 Phase
230 VAC / 50-60 HZ / 1 Phase
Average Current Draw:
@ 115 VAC / Amps: 0.6 Amps
@ 230 VAC / Amps: 0.3 Amps
|Liquid End Code / Chemical|
PHC - AMMONIA, 10%, CITRIC ACID, 10 - 20%, SODIUM HYDROXIDE, 0 - 50%, SODIUM SILICATE, SODIUM SULFATE, SODIUM SULFIDE
ATS - DEAE - Steamline Treatment
PTC - FERRIC SULFATE, HYDROCHLORIC ACID, 0 - 37%, LACTIC ACID, POTASSIUM CHLORIDE, POTASSIUM PERMANGANATE SODIUM BI-CARBONATE, SODIUM BI-SULFATE, SODIUM CARBONATE, SODIUM NITRATE, SULFURIC ACID, 0 - 10%, SULFURIC ACID, 10 - 75%
PTT - FLUOSILICIC ACID, HYDROFLUOSILICIC ACID, 20%
KTT - HYDROCHLORIC ACID, 37 - 100%
PVC - NITRIC ACID, 0 - 20%,
VVC - SODIUM HYPOCHLORITE
KTC - PHOSPHORIC ACID, 0 - 100%, SULFURIC ACID, 95 - 100%
Chemical Delivery / Transfer20420 products
Chemical Metering20420 products
Filtration Systems20420 products
Food Processing20420 products
Gas & Petroleum20420 products
Municipal Drinking Water20420 products
Paints & Dyes20420 products
Pharmaceutical / Chemical20420 products
Pool & Spa20420 products
Pulp & Paper20420 products
Wastewater / Trash / Sewage20420 products
You need to sign in to add a review.
Stay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.