Image shown may not be actual product
Pulsatron Model LTH5SA-VTC3-R20 Metering Pump, Series ET, 76 GPD @ 150 PSI, Dual Manual Control with Water Meter Input, 115 VAC, PVC/TFE/CDBL.50T
Pulsatron Model LTH5SA-VTC3-R20 Metering Pump, Series ET, 76 GPD @ 150 PSI, Dual Manual Control with Water Meter Input, 115 VAC, PVC/TFE/CDBL.50T
Accessories | • KOP Kits • Gauges • Dampeners • Pressure Relief Valves • Tanks • Pre-Engineered Systems • Process Controllers |
Connections / Discharge (Inches) | Tubing 1/2" OD |
Connection Type | Tubing |
Diaphragm | PTFE faced CSPE |
Discharge NPT (Inches) | .38" x .50" |
Flow Control | Manual On/Off |
Flow Rate LPH | 11.9 |
GPH Flow Limitations (250 SPM) | 3.26-20 |
Head / Fittings | PVC (Polyvinyl Chloride) |
Hz | 50/60 |
Includes | A weighted foot valve/strainer assembly, a bleed valve assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 4' bleed/return tubing, 8' discharge tubing and Owners Manual. |
Liquid End Configuration | PVC / TFE / Ceramic |
Maximum Flow (GPD) | 76 |
Maximum Flow (GPH) | 3.15 |
Maximum Pressure (PSI) | 150 |
Maximum Viscosity (CPS) | 1000 |
Pressure Rating BAR | 10 |
Suction NPT (Inches) | .38" x .50" |
Turn Down Ratio | 10:1 |
Valve Balls | Ceramic |
Valve / Seat / O-Ring | Teflon |
Viscocity | 1000 up to 3000 cps w/ SS balls |
Voltage | 115 |
Features & Benefits |
---|
Dual Manual Control with Water Meter Input: Stroke length is manually adjustable, stroke frequency is manually adjustable. In count modes (4), pump will run for a specified time (1-200 seconds or 12 sec to 20 minutes) for every (1 or 10) water meter contact inputs. 100:1 max turndown. Pulsatron Series ET Chemical Metering Pump by Pulsafeeder • Complete Timer Control in one unique package. • Simple Mode Select knob, Stroke Length knob, and Stroke Rate knob. • Two Selectable Time Base Settings. • Water Meter Input. Activate pump on 1 or 10 counts. • Isolated Dry Contact Water Meter Output. • Highly Reliable timing circuit. • Isolated from Earth Ground. • Circuit Protection against voltage and current upsets. • Solenoid Protection by thermal overload with auto-reset. • Water Resistant, for outdoor and indoor applications. • Internally Dampened To Reduce Noise. • Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. • Few Moving Parts and Wall Mountable. • Safe & Easy Priming with durable leak-free bleed valve assembly (standard). • Reliable metering performance. • Rated "hot" for continuous duty. • Leak-free, sealless, liquid end. |
General Description |
Pulsafeeder PULSAtron PLUS Series ET chemical metering pumps are positive displacement, diaphragm type pumps with Integrated Feed Control per Water Meter Input. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron PLUS Series ET pump was designed to feed chemical in response to a water meter input. Typical applications include inhibitor feed for an open air-cooling tower. The Series ET provides everything you need in one unique, compact package to create a simple and cost effective metering system. The Series ET counts pulses from a water meter. When the count exceeds a set value (either 1 or 10), the pump starts. The pump will continue to run for an adjustable time period. There are two time ranges - either 2 to 200 seconds or 12 seconds to 20 minutes. The setting is made by selecting a time base value (200 seconds or 20 minutes) and then setting the time base percentage from 1 to 100%. The pump includes both input and output water meter connections at the front panel. The output connection provides an isolated dry contact output of the water meter contact to operate additional pumps or tim ers off the same water meter. There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment. There are no complicated menu structures. Simply select the desired mode on the front panel and connect the water meter input. There are two selectable time base settings. Choose the time base appropriate for your applications and set the percent value to run the amount of time you desire. |
Pump Controls |
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency (modes 1 & 2) or changing percent of time (modes 3 through 6). Both knobs are located opposite the liquid handling end. Automatic control via water meter input. Standby-Manual-Count/Time switch. |
Drive Assembly |
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts. |
Materials of Construction |
Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly. |
Engineering Data - Materials |
Pump Head Materials: GFPPL, PVC, PVDF, 316 SS Diaphragm: PTFE-faced CSPE-backed Available Seat O-Rings: PTFE, CSPE, Viton Available Ball Types: Ceramic, PTFE, 316 SS, Alloy C Available Fitting Material: GFPPL, PVC, PVDF Bleed Valve: Same as fitting and check valve selected (except 316 SS) Available Tubing: Clear PVC, White PE Important Material Codes: GFPPL = Glass-filled Polypropylene PVC = Polyvinyl Chloride PE = Polyethylene PVDF = Polyvinylidene Fluoride PTFE = Polytetrafluoroethylene CSPE = Generic formulation of Hypalon, a registered trademark of E.I. DuPont Company. Viton is a registered trademark of E.I. DuPont Company. PVC wetted end recommended for sodium hypochlorite. |
Controls |
• Manual Stroke Rate • Manual Stroke Length • External Pacing - Optional |
Control Options |
Available Control Options: • Manual On/Off |
Engineering Data - Tech |
Reproducibility: +/- 2% at maximum capacity Controls: Standby 200 sec/count 20 min/count On 200 sec/10 count 20 min/10 count Stroke Length Turn-Down Ratio: 10:1 Power Input: 115 VAC / 50-60 HZ / 1 Phase 230 VAC / 50-60 HZ / 1 Phase 5 Amp max Power Output: 120VAC or 250VAC @ 50/60 HZ, 5A max |
Chemical Compatibility |
Liquid End Code / Chemical PHC - AMMONIA, 10%, CITRIC ACID, 10 - 20%, SODIUM HYDROXIDE, 0 - 50%, SODIUM SILICATE, SODIUM SULFATE, SODIUM SULFIDE ATS - DEAE - Steamline Treatment PTC - FERRIC SULFATE, HYDROCHLORIC ACID, 0 - 37%, LACTIC ACID, POTASSIUM CHLORIDE, POTASSIUM PERMANGANATE SODIUM BI-CARBONATE, SODIUM BI-SULFATE, SODIUM CARBONATE, SODIUM NITRATE, SULFURIC ACID, 0 - 10%, SULFURIC ACID, 10 - 75% PTT - FLUOSILICIC ACID, HYDROFLUOSILICIC ACID, 20% KTT - HYDROCHLORIC ACID, 37 - 100% PVC - NITRIC ACID, 0 - 20%, VVC - SODIUM HYPOCHLORITE KTC - PHOSPHORIC ACID, 0 - 100%, SULFURIC ACID, 95 - 100% |
Agriculture
22583 productsBulk Plant Services
187 productsChemical Delivery / Transfer
22583 productsChemical Metering
22583 productsFiltration Systems
22583 productsFood Processing
22583 productsGas & Petroleum
22583 productsMining
22583 productsMunicipal Drinking Water
22583 productsPaints & Dyes
22583 productsPharmaceutical / Chemical
22583 productsPool & Spa
22583 productsPulp & Paper
22583 productsUtilities
22583 productsWastewater / Trash / Sewage
22583 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.