• Pulsatron Pumps Model LE02SB-VTC1-XXX Chemical Metering Pump
  • Pulsatron Pumps Model LE02SB-VTC1-XXX Chemical Metering Pump Side View
  • Pulsatron Pumps Model LE02SB-VTC1-XXX Chemical Metering Pump Back View

Image shown may not be actual product

Pulsatron

LE02SB-VTC1-XXX

0 reviews

Pulsatron Model LE02SB-VTC1-XXX Metering Pump, Series E, 6 GPD @ 150 PSI, Dual Manual Control, 230 VAC, PVC/TFE/CDBL .38T

$354.28

Item: LE02SB-VTC1-XXX
  • Overview
  • Series Info
  • Reviews
  • Literature/Manuals

LE02SB-VTC1-XXX

Pulsatron Model LE02SB-VTC1-XXX Metering Pump, Series E, 6 GPD @ 150 PSI, Dual Manual Control, 230 VAC, PVC/TFE/CDBL .38T

Accessories• KOP Kits • Gauges • Dampeners • Pressure Relief Valves • Tanks • Pre-Engineered Systems • Process Controllers
Connections / Discharge (Inches)Tubing 3/8" OD
Connection TypeTubing
DiaphragmPTFE faced CSPE
Discharge NPT (Inches).25" x .38"
Flow ControlDual Manual Control
Flow Rate LPH0.9
GPH Flow Limitations (250 SPM)0-3.76
GPH Flow Limitiatiaon0 - 1.88
Head / FittingsPVC
Hz50/60
Liquid End ConfigurationPVC / TFE / Ceramic
Maximum Flow (GPD)6
Maximum Flow (GPH)0.25
Maximum Pressure (PSI)150
Maximum Strokes Per Minute125
Maximum Viscosity (CPS)1000
OptionsStandardPump - No Options
PhaseSingle Phase
Pressure Rating BAR10
Suction NPT (Inches).25" x .38"
Turn Down Ratio0.417361111111
Valve BallsCeramic
Valve / Seat / O-RingTeflon®
Viscocity1000 up to 3000 cps w / SS balls
Voltage230

E Series Information

Features & Benefits
Dual Manual Control: Stroke frequency and stroke length are manually adjustable.

Pulsatron Series EChemical Metering Pump by Pulsafeeder

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Panel Mounted Fuse.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Indicator Lights, panel mounted.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Reliable metering performance.
• Rated "hot" for continuous duty.
• Leak-free, sealless, liquid end.
General Description
Pulsafeeder PULSAtron Series E chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E pump features manual control by on-line adjustable stroke rate and stroke length. It has been agency approved for demanding outdoor and indoor applications. Series E is internally dampened to reduce noise which makes it very acceptable for household installations. It is also water resistant to accommodate outdoor installations as well. It features guided ball check valve systems to reduce back flow and enhance outstanding priming characteristics. Series E also offers few moving parts and is easily wall mountable. Series E guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series E pumps continue to meet their specifications for pressure and capacity even during extended use. It also features safe and easy priming with durable leak-free bleed valve assembly.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Engineering Data - Materials
Pump Head Materials: GFPPL, PVC, PVDF, 316 SS
Diaphragm: PTFE-faced CSPE-backed
Available Seat O-Rings: PTFE, CSPE, Viton
Available Ball Types: Ceramic, PTFE, 316 SS, Alloy C
Available Fitting Material: GFPPL, PVC, PVDF
Bleed Valve: Same as fitting and check valve selected (except 316 SS)
Available Tubing: Clear PVC, White PE

Important Material Codes:
GFPPL = Glass-filled Polypropylene
PVC = Polyvinyl Chloride
PE = Polyethylene
PVDF = Polyvinylidene Fluoride
PTFE = Polytetrafluoroethylene
CSPE = Generic formulation of Hypalon, a registered trademark of E.I. DuPont Company.
Viton is a registered trademark of E.I. DuPont Company.
PVC wetted end recommended for sodium hypochlorite.
Controls
• Manual Stroke Rate
• Manual Stroke Length
• External Pacing - Optional
Control Options
Available Control Options:

• Manual Control

*Check Model Number Codes and Configuration Options
Engineering Data - Tech
Reproducibility: +/- 2% at maximum capacity
Viscosity Max CPS: For viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded ball checks. See Selection Guide for proper connection.
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1

Power Input:
115 VAC / 50-60 HZ / 1 Phase
230 VAC / 50-60 HZ / 1 Phase

Average Current Draw:
@ 115 VAC / Amps: 1.0 Amps
@ 230 VAC / Amps: 0.5 Amps

Peak Input Power: 300 Watts
Average Input Power @ Max SPM: 130 Watts
Chemical Compatibility
Liquid End Code / Chemical

PHC - AMMONIA, 10%, CITRIC ACID, 10 - 20%, SODIUM HYDROXIDE, 0 - 50%, SODIUM SILICATE, SODIUM SULFATE, SODIUM SULFIDE
ATS - DEAE - Steamline Treatment
PTC - FERRIC SULFATE, HYDROCHLORIC ACID, 0 - 37%, LACTIC ACID, POTASSIUM CHLORIDE, POTASSIUM PERMANGANATE SODIUM BI-CARBONATE, SODIUM BI-SULFATE, SODIUM CARBONATE, SODIUM NITRATE, SULFURIC ACID, 0 - 10%, SULFURIC ACID, 10 - 75%
PTT - FLUOSILICIC ACID, HYDROFLUOSILICIC ACID, 20%
KTT - HYDROCHLORIC ACID, 37 - 100%
PVC - NITRIC ACID, 0 - 20%,
VVC - SODIUM HYPOCHLORITE
KTC - PHOSPHORIC ACID, 0 - 100%, SULFURIC ACID, 95 - 100%

Categories

0 Reviews

Add a Review

You need to sign in to add a review.

SeriesTypeLink

E Series

Pulsatron Series E Electronic Metering Pump Brochure

View

E Series

Pulsatron Series E Electronic Metering Pump Datasheet

View

E Series

Pulsatron Series E Electronic Metering Pump Parts

View

E Series

Pulsatron Series E Electronic Metering Pump Product List

View

HD Product Demos & More

Stay tuned for releases of new product reviews and videos on our YouTube channel!

Secure Online Shopping

We take your privacy and security serious. Feel safe when shopping in our online marketplace.

  • Burks
  • LMI
  • Berkeley
  • Grundfos
  • Goulds

Still have questions?Call our Pump Hotline at 1-800-810-1053

sign up and save.