Image shown may not be actual product
Pulsatron Model LS44S4-KTCA-130 Metering Pump, Series E-DC, GPD @ PSI, Dual Manual Control, 12 Volt DC, PVD/TFE/CDBL.50T
Pulsatron Model LS44S4-KTCA-130 Metering Pump, Series E-DC, GPD @ PSI, Dual Manual Control, 12 Volt DC, PVD/TFE/CDBL.50T
Accessories | • KOP Kits • Gauges • Dampeners • Pressure Relief Valves • Tanks • Pre-Engineered Systems • Process Controllers |
Connections / Discharge (Inches) | Tubing 1/2" OD |
Connection Type | Tubing |
Diaphragm | PTFE faced CSPE |
Discharge NPT (Inches) | .38" x .50" |
Flow Control | Dual Manual Control |
Flow Rate LPH | 1.9 |
GPH Flow Limitations (250 SPM) | 0-3.76 |
Head / Fittings | PVDF (Polyvinylidene Fluoride) |
Includes | A weighted foot valve/strainer assembly, a bleed valve assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 4' bleed/return tubing, 8' discharge tubing and Owners Manual. |
Liquid End Configuration | PVDF (Kynar) / TFE / Ceramic |
Maximum Flow (GPD) | 12 |
Maximum Flow (GPH) | 0.5 |
Maximum Pressure (PSI) | 150 |
Maximum Strokes Per Minute | 125 |
Maximum Viscosity (CPS) | 1000 |
Options | PVDF Tubing |
Pressure Rating BAR | 10 |
Suction NPT (Inches) | .38" x .50" |
Turn Down Ratio | 10:1 |
Valve Balls | Ceramic |
Valve / Seat / O-Ring | Teflon |
Viscocity | 1000 up to 3000 cps w/ SS balls |
Voltage | 12 VDC |
Features & Benefits |
---|
Dual Manual Control: Stroke frequency and stroke length are manually adjustable. Pulsatron Series E-DC Chemical Metering Pump by Pulsafeeder • Powered by 12 Volt DC. • Manual Control by on-line adjustable stroke rate and stroke length. • Highly Reliable timing circuit. • Circuit Protection against voltage and current upsets. • Solenoid Protection by thermal overload with auto-reset. • Water Resistant, for outdoor and indoor applications. • Internally Dampened To Reduce Noise. • Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. • Few Moving Parts and Wall Mountable. • Safe & Easy Priming with durable leak-free bleed valve assembly (standard). • Reliable metering performance. • Rated "hot" for continuous duty. • Leak-free, sealless, liquid end. |
General Description |
Pulsafeeder PULSAtron Series E-DC chemical metering pumps are 12 VOLT DC positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E-DC pump features manual control by on-line adjustable stroke rate and stroke length. It has been agency approved for demanding outdoor and indoor applications. Series E-DC is internally dampened to reduce noise which makes it very acceptable for household installations. It is also water resistant to accommodate outdoor installations as well. It features guided ball check valve systems to reduce back flow and enhance outstanding priming characteristics. Series E-DC also offers few moving parts and is easily wall mountable. Series E-DC guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series E-DC pumps continue to meet their specifications for pressure and capacity even during extended use. It also features safe and easy priming with durable leak-free bleed valve assembly. |
Pump Controls |
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. |
Drive Assembly |
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts LS02/13/14 and 100 Watts LS44. |
Materials of Construction |
Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly. |
Engineering Data - Materials |
Pump Head Materials: GFPPL, PVC, PVDF, 316 SS Diaphragm: PTFE-faced CSPE-backed Available Seat O-Rings: PTFE, CSPE, Viton Available Ball Types: Ceramic, PTFE, 316 SS, Alloy C Available Fitting Material: GFPPL, PVC, PVDF Bleed Valve: Same as fitting and check valve selected (except 316 SS) Available Tubing: Clear PVC, White PE Important Material Codes: GFPPL = Glass-filled Polypropylene PVC = Polyvinyl Chloride PE = Polyethylene PVDF = Polyvinylidene Fluoride PTFE = Polytetrafluoroethylene CSPE = Generic formulation of Hypalon, a registered trademark of E.I. DuPont Company. Viton is a registered trademark of E.I. DuPont Company. PVC wetted end recommended for sodium hypochlorite. |
Controls |
• Manual Stroke Rate: Turn Down Ratio 10:1 • Manual Stroke Length - Turn Down Ratio 10:1 • 4-20mADC Direct or External Pacing with Stop - Automatic Control |
Control Options |
No Options Available |
Engineering Data - Tech |
Reproducibility: +/- 3% at maximum capacity Viscosity Max CPS: LS02, 13: 300 CPS LS14, 44: 1000 CPS Stroke Frequency Max SPM: 125 Stroke Frequency Turn-Down Ratio: 10:1 Stroke Length Turn-Down Ratio: 10:1 Power Input: 12.6 VDC Nominal Range 11.8-14.0 VDC Average Current Draw: LS02, 13, 14 Amps: 4.0 Amps LS44 Amps: 8.0 Amps Peak Input Power: LS02, 13, 14 Power: 138.6 Watts LS44 Power: 189 Watts Average Input Power @ Max SPM: LS02, 13, 14 Power: 50.4 Watts LS44 Power: 100.8 Watts |
Chemical Compatibility |
Liquid End Code / Chemical PHC - AMMONIA, 10%, CITRIC ACID, 10 - 20%, SODIUM HYDROXIDE, 0 - 50%, SODIUM SILICATE, SODIUM SULFATE, SODIUM SULFIDE ATS - DEAE - Steamline Treatment PTC - FERRIC SULFATE, HYDROCHLORIC ACID, 0 - 37%, LACTIC ACID, POTASSIUM CHLORIDE, POTASSIUM PERMANGANATE SODIUM BI-CARBONATE, SODIUM BI-SULFATE, SODIUM CARBONATE, SODIUM NITRATE, SULFURIC ACID, 0 - 10%, SULFURIC ACID, 10 - 75% PTT - FLUOSILICIC ACID, HYDROFLUOSILICIC ACID, 20% KTT - HYDROCHLORIC ACID, 37 - 100% PVC - NITRIC ACID, 0 - 20%, VVC - SODIUM HYPOCHLORITE KTC - PHOSPHORIC ACID, 0 - 100%, SULFURIC ACID, 95 - 100% |
Agriculture
22583 productsChemical Delivery / Transfer
22583 productsChemical Metering
22583 productsFiltration Systems
22583 productsFood Processing
22583 productsGas & Petroleum
22583 productsMining
22583 productsMunicipal Drinking Water
22583 productsPaints & Dyes
22583 productsPharmaceutical / Chemical
22583 productsPool & Spa
22583 productsPulp & Paper
22583 productsUtilities
22583 productsWastewater / Trash / Sewage
22583 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.