S40HT-11-01

Image shown may not be actual product

S40HT-11-01

0 reviews

S40HT-11-01 Myers S40HT High Temperature Effluent Pump Series - 1/3 HP, 115 Volts, 60 Hz, Single Phase, 1550 RPM, 1-1/2" NPT Discharge, Solids to: 3/4", Manual Float Switch, 20' 16/3, SJOOW-A/SJOW Cord, Minimum Recommended Sump Diameter: Simplex: 18” (45.7 cm); Duplex: 30” (76.2 cm), Temperatures up to 200°F (93°C). Engineering #: 26609D000.

Call for Pricing

Best Price Guarantee!

Item: S40HT-11-01 | Part #: 26609D000

Overview
Series Info
Reviews
Literature/Manuals

S40HT-11-01

Capacities (GPM)	45 GPM (170 LPM)
Cord Length	20'
Cord Type	16/3, SJOOW-A/SJOW
Discharge NPT (Inches)	1-1/2" NPT
Elastomer	Buna-N
Float Switch Style	Manual
Heads To (Feet)	21'
HP	0.33
Hz	60
Impeller Material	Cast Iron

Minimum Basin Diameter	Simplex: 18” (45.7 cm); Duplex: 30” (76.2 cm)
Part Number	26609D000
Phase	1 Ph (Single Phase)
Shaft Seal Material	Type 6A or equal, Carbon/Ceramic
Solids (Inches)	3/4" Max
Speed (RPM)	1550
UPC	054128307008
Voltage	115
Volute Case Material	Cast Iron

S40HT / S50HT Effluent Pumps Information

Features & Benefits
Myers S40HT Effluent Pump Features and Benefits: All cast iron housing, volute case, and impeller resists the most extreme corrosive environments Rugged-built, oil-filled motor for continuous bearing lubrication and maximum heat dissipation Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature Lower ball bearing eliminates sleeve bearing wear and reduces motor wear Non-clog vortex style, ejector vanes for seal protection Allows easy disassembly after extended service Prevents oil loss from - and moisture protection for - motor Permanently lubricated for long life Heavy-duty lift-out ring Myers S50HT Effluent Pump Features and Benefits: 1/2 HP Class 30 cast iron construction 2" (50.8 mm) NPT discharge Silicon carbide shaft seals Oil-filled motor with automatic reset overload provides safe operation Ball-bearing construction for long life 600V jacketed lead for added durability Easily replaceable power cord with optional lengths available NOTE: Control Panel #PW217-280 (sold separately) is required for this pump to function. See your dealer for details.
General Description
Myers S40HT Efluent Pump General Specifications: BODY CONSTRUCTION: Cast Iron HORSEPOWER: 1/3 HP MAXIMUM HEAD: 21' MAXIMUM CAPACITY: 45 GPM FLOW at 10' LIFT: 43 GPM SWITCH TYPE: Tethered Float w/ Piggyback Plug SWITCH 'ON' LEVEL: 13.5" SWITCH 'OFF' LEVEL: 4.5" MINIMUM SUMP DIAMETER: Sinplex: 18" Duplex: 30" DISCHARGE PIPE SIZE: 1-1/2" NPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" AMP DRAW (full load): 12 Amps CORD LENGTH: 20' VOLTAGE: 115v AC, 60 Hz MAXIMUM LIQUID TEMPERATURE: S40HT-11P: 194F (90C) S40HT-11: 200F (93C) Myers S50HT Efluent Pump General Specifications: BODY CONSTRUCTION: Cast Iron HORSEPOWER: 1/2 HP MAXIMUM HEAD: 50' MAXIMUM CAPACITY: 100 GPM FLOW at 10' LIFT: 92 GPM SWITCH TYPE: Tethered Float Connected To Control Panel MAXIMUM SUMP DIAMETER: Simplex: 24" Duplex: 36" DISCHARGE PIPE SIZE: 2" NPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" AMP DRAW (full load): 12 Amps CORD LENGTH: 20' VOLTAGE: 115v AC, 60 Hz MAXIMUM LIQUID TEMPERATURE: 200F (93C)