Image shown may not be actual product

P762-362SI

0 reviews

LMI Pumps P762-362SI Series P Metering Pump, 2 GPH @ 50, 230 Volt, 50/60 HZ, 4 Function Valve (4FV)

Call for Pricing

Best Price Guarantee!

Item: P762-362SI

Repair Parts Exploded View Diagram

Overview
Series Info
Reviews
Literature/Manuals
Repair Parts

P762-362SI

LMI Pumps P762-362SI Series P Metering Pump, 2 GPH @ 50, 230 Volt, 50/60 HZ, 4 Function Valve (4FV)

Accessories	4 Function Valve (4FV)
Connections / Discharge (Inches)	Tubing PE 3/8" O.D.
Diaphragm	Fluorofilm
Flow Control	Pulse Input with Dual Manual Control
Head / Fittings	Molded PVDF / PVDF
Hz	50/60
Includes	4FV-Four Function Valve (anti-siphon, back pressure, priming/pressure release and pressure relief), Tubing, Foot Valve and Strainer, Ceramic Foot Valve Weight, 1/2" NPT Male Injection Check/Back Pressure Valve, and Instruction Manual
Maximum Flow (GPD)	48
Maximum Flow (GPH)	2

Maximum Pressure (PSI)	50
Maximum Strokes Per Minute	100
Maximum Viscosity (CPS)	400
Turn Down Ratio	600:1
Valve Balls	Ceramic
Valve / Seat / O-Ring	Polyprel
Voltage	230

P Series Information

General Description
LMI Roytronic Series P chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
The stroke frequency will be fixed. Stroke length shall be adjustable by a readily accessible dial knob located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 7.6 lbs (3.5 kg).
Pressure Relief
The LMI 4-Function Valve is recommended with a LiquiPro or AutoPrime Liquid End to provide automatic pressure relief.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve / Tubing Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections on models with tubing connections. A foot valve with integral one piece strainer shall be provided for the suction line, and an injection check/back pressure valve with 1/2" NPT male connection for the injection point. The injection check valve shall incorporate a dilating orifice which prohibits scale formation and accumulation of crystalline deposits.

0 Reviews

Add a Review

You need to sign in to add a review.

Type	Title		Link
	LMI Series P Electronic Metering Pump Specification Sheet		View
	LMI Series P Electronic Metering Pump Data Sheet		View
	LE 3X2SX LE 3X8SX LMI Pump Liquid End Sheet Parts Exploded View Diagram		View
	LMI Pumps P7 Drive Assembly Exploded View Parts Diagram		View
	LE 362SI LMI Pump Liquid End Sheet Parts Exploded View Diagram		View