Image shown may not be actual product
LMI Pumps B112-392BI Series B Chemical Metering Pump, 1.6 GPH, 150 psi (10.3 Bar) Max PSI, 50/60 Hz, 240V AC, USA only Volt, Dual Manual Control, PVDF/PVDF, Ceramic Valve Balls, Fluorofilm™ Diaphragm, PVDF/Polyprel Seat & O-Ring, PE .375" OD,
LMI Pumps B112-392BI Series B Chemical Metering Pump, 1.6 GPH, 150 psi (10.3 Bar) Max PSI, 50/60 Hz, 240V AC, USA only Volt, Dual Manual Control, PVDF/PVDF, Ceramic Valve Balls, Fluorofilm™ Diaphragm, PVDF/Polyprel Seat & O-Ring, PE .375" OD,
Connections / Discharge (Inches) | PE 3/8" O.D. |
Diaphragm | Fluorofilm |
Flow Control | Dual Manual Control |
Head / Fittings | PVDF / PVDF |
Hz | 50/60 |
Includes | FastPrime, 4FV - Four Function Valve |
Maximum Flow (GPD) | 38.4 |
Maximum Flow (GPH) | 1.6 |
Maximum Pressure (PSI) | 150 psi (10.3 Bar) |
Maximum Strokes Per Minute | 100 |
Turn Down Ratio | 600:1 |
Valve Balls | Ceramic |
Valve / Seat / O-Ring | PVDF / Polyprel |
Voltage | 240V AC, USA only |
General Description |
---|
LMI Series B chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity. |
Pump Controls |
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end. |
Drive Assembly |
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 29 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 15 lbs (6.9 kg). |
Pressure Relief |
To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%. |
Materials of Construction |
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly. |
Check Valve / Tubing Connections |
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections). |
Chemical Metering
39812 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.