Image shown may not be actual product

B111-392SU

0 reviews

LMI Pumps B111-392SU Series B Chemical Metering Pump, 1.6 GPH, 150 psi (10.3 Bar) Max PSI, 50/60 Hz, 120V AC Volt, Dual Manual Control, PVDF/PVDF, Ceramic Valve Balls, Fluorofilm™ Diaphragm, PVDF/Polyprel Seat & O-Ring, PE .375" OD,

Call for Pricing

Best Price Guarantee!

Item: B111-392SU

Repair Parts Exploded View Diagram

Overview
Series Info
Reviews
Literature/Manuals
Repair Parts

B111-392SU

Connections / Discharge (Inches)	PE 3/8" O.D.
Diaphragm	Fluorofilm
Flow Control	Dual Manual Control
Head / Fittings	PVDF / PVDF
Hz	50/60
Includes	FastPrime, 4FV - Four Function Valve
Maximum Flow (GPD)	38.4
Maximum Flow (GPH)	1.6

Maximum Pressure (PSI)	150 psi (10.3 Bar)
Maximum Strokes Per Minute	100
Turn Down Ratio	600:1
Valve Balls	Ceramic
Valve / Seat / O-Ring	PVDF / Polyprel
Voltage	120V

B Series Information

General Description
LMI Series B chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 29 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 15 lbs (6.9 kg).
Pressure Relief
To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve / Tubing Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).

0 Reviews

Add a Review

You need to sign in to add a review.

Type	Title		Link
	LMI Series B Electronic Metering Pump Specification Sheet		View
	LMI Series B Electronic Metering Pump Data Sheet		View
	LMI Pumps B1 Drive Assembly Exploded View Parts Diagram		View
	LE 3X2SX LE 3X8SX LMI Pump Liquid End Sheet Parts Exploded View Diagram		View
	LE 392SU LMI Pump Liquid End Sheet Parts Exploded View Diagram		View