Image shown may not be actual product
Hydromatic SD33A1 20 Submersible Sump Pump, 1-1/2" Discharge, 1/3 HP, 115 Volts, 1 Phase, 1550 RPM, 3/8" Solids Handling
Hydromatic SD33A1 20 Submersible Sump Pump, 1-1/2" Discharge, 1/3 HP, 115 Volts, 1 Phase, 1550 RPM, 3/8" Solids Handling
Actual Weight | 30 |
Built in Overload Protection | Yes |
Connections / Discharge (Inches) | 1-1/2" |
Cord Length | 20' |
Float Switch Style | Piggy Back Diaphragm |
HP | 0.33 |
Material | Cast Iron |
Part Number | 518100017 |
Phase | 1 |
Plug-In | Yes |
Solids (Inches) | 3/8" dia. (9.5 mm) |
Speed (RPM) | 1550 |
Switch Turn Off | 3-7/8 |
Switch Turn On | 7-3/8 |
Voltage | 115 |
Wire/Cord Size | 16/3 |
Features & Benefits |
---|
SW SD VS Cast Iron Sump Pump Key Features: Carbon-Ceramic Mechanical Shaft Seal, Oil-Filled Motor with Automatic Reset Thermal Overload, Uses Single-Row Ball Bearing Construction, Piggyback Plug for Easy Maintenance and Replacement |
General Description |
SW SD VS Cast Iron Sump Pump General Specifications: BODY CONSTRUCTION: Cast Iron & Engineered Thermoplastic HORSEPOWER: Available in 1/3 or 1/2 HP MAXIMUM HEAD: S_33: 26 ft. (7.9 m) / S_50: 29 ft. (8.8 m) MAXIMUM CAPACITY: S_33: 48 GPM (3.0 LPS) / S_50: 65 GPM (4.1 LPS) FLOW at 10' LIFT: S_33: 40 GPM / S_50: 54 GPM SWITCH TYPE: Available with Wide-Angle Tethered, Vertical, or Diaphragm Switch MINIMUM SUMP DIAMETER: S_33: 18" (457.2 mm) / S_50: 18" (457.2 mm) DISCHARGE PIPE SIZE: 1-1/2" NPT MAXIMUM SOLIDS HANDLING SIZE: S_33: 3/8" (9.5mm) / 3/4" (19.1 mm) AMP DRAW (full load): S_33: 10 Amps / S_50: 12 Amps CORD LENGTH: 10', SJTW (20' optional) VOLTAGE: 115v AC, 60 Hz MAXIMUM WATER TEMPERATURE: 120°F (49°C) IMPELLER CONSTRUCTION: Thermoplastic |
Basement Draining
48 productsCirculation
37 productsWater Transfer
37 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.