Image shown may not be actual product

S3WRD150M6-2

0 reviews

Hydromatic S3WRD150M6-2 S3WRD Series Double Seal Solids Handling Pump, 3" Discharge, 1-1/2 HP, 200 Volts, 3 Phase, 3450 RPM, 2-1/2" Solids Handling

Item: S3WRD150M6-2 | Part #: 52799E112

Hydromatic S3WRD150M6-2 S3WRD Series Double Seal Solids Handling Pump, 3" Discharge, 1-1/2 HP, 200 Volts, 3 Phase, 3450 RPM, 2-1/2" Solids Handling

Actual Weight	125
Built in Overload Protection	No
Connections / Discharge (Inches)	3"
Cord Length	20'
Float Switch Style	No
HP	1.5
Material	Cast Iron
Part Number	52799E112
Phase	3

Features & Benefits
S3WR Solids Handling Pumps Key Features: Recessed impeller design has completely open passage in volute, Operates without vibration or cavitation over entire performance curve; operates near shutoff without harming pump. Recessed impeller greatly increases bearing life by reducing radial load, Oil-filled motor for maximum heat dissipation and constant bearing lubrication, Heat sensor thermostats embedded in windings protect motor from overheat conditions, Seal leak probes warn of moisture entry (dual seal only)
General Description
S3WR Solids Handling Pump General Specifications: BODY CONSTRUCTION: Class 30 cast iron; ASTM A48 HORSEPOWER: 1.5–3 HP MAXIMUM HEAD: up to 51 ft. (15.6 m) MAXIMUM CAPACITY: up to 280 GPM (17.7 LPS) SWITCH TYPE: Control panel required MINIMUM SUMP DIAMETER: Duplex = 48" (1219.2 mm) DISCHARGE PIPE SIZE: 3" (76.2 mm) flanged horizontal MAXIMUM SOLIDS HANDLING SIZE: 1750 RPM: 2.5" (63.5 mm) / 3450 RPM: 2" (50.6 mm) AMP DRAW (full load): Horsepower and voltage dependent CORD LENGTH: 20'; type SJOW/SJOWA, SOOW VOLTAGE: 1.5–3 HP, 1ø, 208V/230V, 60Hz / 1.5–3 HP, 3ø, 208V/230V/460V/575V, 60Hz; MAXIMUM LIQUID TEMPERATURE: 140°F (60°C) MOTOR: Enclosed, oil cooled induction IMPELLER CONSTRUCTION: Ductile iron; Class 65; ASTM A536