Image shown may not be actual product

S3WD300M2-2

0 reviews

Hydromatic S3WD300M2-2 S3WD Series Double Seal Solids Handling Pump, 3" Discharge, 3 HP, 230 Volts, 1 Phase, 3450 RPM, 2-1/2" Solids Handling

Item: S3WD300M2-2 | Part #: 52797E130

Hydromatic S3WD300M2-2 S3WD Series Double Seal Solids Handling Pump, 3" Discharge, 3 HP, 230 Volts, 1 Phase, 3450 RPM, 2-1/2" Solids Handling

Actual Weight	113
Built in Overload Protection	Yes
Connections / Discharge (Inches)	3"
Cord Length	20'
Float Switch Style	No
HP	3
Material	Cast Iron
Part Number	52797E130
Phase	1

Features & Benefits
S3W Solids Handling Pumps Key Features: Two-vaned rounded port impellers, Offered in two speeds, Hydraulic end virtually maintenance-free, Volute seal ring replaceable in minutes, Oil-filled motor for constant bearing lubrication, High torque, permanent split capacitor (PSC), single-phase motors; No starting switches or relays, Optional seal leak probe (dual seal motors only), Current and temperature overload (single phase only)
General Description
S3W Solids Handling Pump General Specifications: BODY CONSTRUCTION: Class 30 cast iron; ASTM A48 HORSEPOWER: 1.5–3 HP (1750 RPM) or 1–3 HP (3450 RPM) MAXIMUM HEAD: up to 92 ft. (28.0 m) MAXIMUM CAPACITY: up to 330 GPM (20.8 LPS) SWITCH TYPE: Control panel required MINIMUM SUMP DIAMETER: Duplex = 48" (1219.2 mm) DISCHARGE PIPE SIZE: 3" (76.2 mm) NPT vertical MAXIMUM SOLIDS HANDLING SIZE: 1750 RPM: 2.5" (63.5 mm) / 3450 RPM: 2" (50.6 mm) AMP DRAW (full load): model and voltage dependent CORD LENGTH: 20'; type SJOW/SJOWA VOLTAGE: 1ø, 208V/230V, 60Hz / 3ø, 208V/230V/460V/575V, 60Hz MAXIMUM LIQUID TEMPERATURE: 140°F (60°C) MOTOR: Enclosed, oil cooled induction IMPELLER CONSTRUCTION: Ductile iron; Class 65; ASTM A536

You need to sign in to add a review.