Husky Packages & Systems: Graco Pumps
OVERVIEW & FEATURES
Ready-to-Install: Pre-configured air-operated pump packages designed for immediate shop or industrial installation, ranging from 3/8-inch dispensing to high-pressure bulk supply.
Application-Specific: Out-of-the-box systems optimized for antifreeze, wash solvents, gear lube evacuation, and high-viscosity material transfer.
Integrated Protection: Includes thermal relief kits to prevent pressure spikes from thermal expansion and desiccant dryers to safeguard moisture-sensitive chemicals.
Flow & Mixing: Dual-inlet manifold options allow for drawing from multiple sources or fluid mixing simultaneously.
Precision Control: Equipped with modular air regulators and gauges for consistent flow adjustment and consistent delivery.
System Integrity: Engineered for total technical compatibility between pumps, regulators, riser tubes, and delivery hardware.
AUTOMOTIVE & FEED SUPPLY OPTIMIZATION
Automotive Service: Optimized for rapid used oil evacuation, gear lube dispensing, and centralized fluid collection. Handles slurries and shavings without pump damage.
Fuel Handling: UL-listed packages available for safe transfer of gasoline, diesel, and ethanol blends.
Proportioning Feed: Serves as the primary transfer supply for Reactor™ and HFR™ systems, providing constant head pressure for high-viscosity resins and isocyanates.
Moisture Control: Specialized desiccant dryer integration prevents chemical crystallization in moisture-sensitive feed lines.
Runaway Protection: Optional DataTrak™ monitoring prevents pump runaway if drums run dry and provides accurate material tracking for project billing.
CONFIGURATION & INSTALLATION
Mounting Versatility: Supports heavy-duty wall brackets, direct 55-gallon drum bung mounts, and portable rolling frames.
Safety & Connectivity: Includes grounding hardware, bleed-type master air valves, swivel unions, and application-matched hoses for a simplified, secure setup.
MATERIALS
Fluid Sections: Acetal, Polypropylene, Carbon Steel, and Stainless Steel.
Riser Tubes: Heavy-duty Carbon Steel or Stainless Steel for direct drum access.
Hoses: Application-matched nylon fluid hoses, neoprene suction hoses, and conductive air lines.
Drive Type: Pneumatic operation for reliability in diverse environments.
TECHNICAL ARCHITECTURE
Pressure Ranges: Fluid working pressures from 100 psi up to 900 psi (depending on pump ratio).
Input Power: Requires clean, dry, filtered air; operating ranges up to 180 psi.
Optimized Fluids: Specifically tuned for antifreeze, wash solvents, lubricants, isocyanates, and polyols.
