Image shown may not be actual product
Burks 10GV6-23SR Centrifugal Pump, Flange Mounted, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, 242 lbs.
Burks 10GV6-23SR Centrifugal Pump, Flange Mounted, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, 242 lbs.
Adapter Material | Cast Iron |
Boiler Feed | Simplex |
Capacities (GPM) | 80 |
Casing Material | Cast Iron |
Casing Working Pressure | 200 |
Heads To (Feet) | 130 |
HP | 1 |
Hz | 60 |
Impeller Material | Bronze |
Impeller Size (Inches) | 4.25" (4 1/4") |
Inlet Pressure (PSI) | 100 |
Material | Bronze Fitted |
Maximum Operating Temperature | 225°F (107°C) - Standard Buna-N Seal |
Motor Enclosure Type | ODP - Open Drip Proof |
Motor Shaft Material | 303 Stainless Steel |
Phase | 1 Ph (Single Phase) |
Receiver Size (Gallons) | 23 |
Shaft Seal Material | Carbon / Ceramic / SS Buna-N |
Speed (RPM) | 3500 |
Voltage | 115/230 |
General Description |
---|
Burks GV6 Series - Centrifugal Pumps, Flange Mounted |
Materials of Construction |
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron Shaft - #303 Stainless Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze Wear Ring: All Iron: Steel, Bronze Fitted: Bronze Shaft Seal: Carbon Ceramic SS Buna-N |
Motors |
Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation. Open Drip Proof motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction. |
Casing Wear Ring |
Replaceable bronze casing wear ring |
Easy To Service |
Back pull-out design allows servicing without disturbing piping. Pump casing stays in place. |
Factory Tested |
EVERY pump is factory tested |
Motor Information |
60 Hz - 3500 RPM - ODP 50 Hz - 2900 RPM - ODP Single Phase: Thru 2 HP - 115/230 Volt 3 HP is 230 Volt Only Three Phase: 230/460 Volt |
Overload Protection |
All single phase ODP and Totally Enclosed motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty. |
Enclosed Bronze Impeller |
Enclosed bronze impeller threaded onto stainless steel motor shaft. |
Impeller Information |
Impeller balanced for smooth, quiet operation. |
Chillers / Hot Water Systems
9574 productsCooling Tower
11343 productsGeneral Water Services
9574 productsHVAC
9574 productsIndustrial Processes
10299 productsMunicipal Drinking Water
9574 productsSprinkler / Irrigation
10299 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.