Image shown may not be actual product
Burks 104GA7-1-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 1750 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 143JM, 82 lbs.
Burks 104GA7-1-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 1750 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 143JM, 82 lbs.
Adapter Material | Bronze |
Capacities (GPM) | 160 |
Casing Material | Bronze |
Casing Working Pressure | 200 |
Discharge NPT (Inches) | 1-1/2" |
Heads To (Feet) | 57 |
HP | 1 |
Hz | 60 |
Impeller Material | Bronze |
Impeller Size (Inches) | 6.625" (6 5/8") |
Inlet Pressure (PSI) | 100 |
Material | All Bronze |
Maximum Operating Temperature | 225°F (107°C) - Standard Buna-N Seal |
Motor Enclosure Type | ODP - Open Drip Proof |
Motor Frame Size | 143JM |
Motor Shaft Material | Steel |
Phase | 1 Ph (Single Phase) |
Shaft Seal Material | Carbon / Ceramic / SS Buna-N |
Speed (RPM) | 1750 |
Suction NPT (Inches) | 2 |
Voltage | 115/230 |
General Description |
---|
Burks GA7-1-1/2 Series - Centrifugal Pump, Close Coupled |
Materials of Construction |
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Impeller - All Iron: Bronze, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft: Steel. Shaft Sleeve: All Iron: #316 Stainless, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft Seal: Carbon Ceramic SS Buna-N *GA7-1-1/2 Does not include All Iron. |
Shaft Sleeve Information |
Gasketed and keyed hook-type sleeve protects shaft from wear and corrosion in seal area. |
Motors |
JM Type motors have NEMA standard mounting flange, extended steel shaft and dual bearings. These motors offer the advantages of quiet operation, controlled shaft deflection for longer seal life, and bearings sized to provide good service life. All motors are supplied by manufacturers with national field service facilities. |
Four Position Casing |
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. |
Mechanical Shaft Seal Information |
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fl uids other than water. |
Factory Tested |
After careful assembly and inspection, VERY pump is factory tested and will meet Hydraulic Institute standards. |
Motor Information |
60 Hz - 1750 RPM - ODP 60 Hz - 3500 RPM - ODP Single Phase: 1thru 2 HP - 115/230 Volt 3 & 7 1/2 HP - 230 Volt Three Phase: 1 thru 10 Hp. - 230/460 Volt 50 Hz - 2900 RPM - ODP 50 Hz - 1450 RPM - ODP Single Phase: 110/220 Volt Three Phase: 380 Volt |
Overload Protection |
All motors must be installed with magnetic starter which provides full overload protection on all legs. Failure to use correct starter and overloads will void motor warranty. |
Enclosed Bronze Impeller |
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation. It is precision fit to shaft with key drive and cap screw lock. |
Chillers / Hot Water Systems
9574 productsCooling Tower
11343 productsGeneral Water Services
9574 productsHVAC
9574 productsIndustrial Processes
10299 productsMunicipal Drinking Water
9574 productsSprinkler / Irrigation
10299 productsKey | Part No | Description | Qty | shipping | price |
---|
Stay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.