Image shown may not be actual product
Burks 10GA4-1-ME Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 56J, 45 lbs.
Burks 10GA4-1-ME Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 56J, 45 lbs.
Adapter Material | Cast Iron |
Capacities (GPM) | 130 |
Casing Material | Cast Iron |
Casing Working Pressure | 100 |
Discharge NPT (Inches) | 1 |
Heads To (Feet) | 75 |
HP | 1 |
Hz | 60 |
Impeller Material | Bronze |
Impeller Size (Inches) | 4.25" (4 1/4") |
Inlet Pressure (PSI) | 70 |
Material | Bronze Fitted |
Motor Enclosure Type | ODP - Open Drip Proof |
Motor Frame Size | 56J |
Motor Shaft Material | 303 Stainless Steel |
Phase | 1 Ph (Single Phase) |
Shaft Seal Material | EPT |
Speed (RPM) | 3500 |
Suction NPT (Inches) | 1-1/4" |
Voltage | 115/230 |
General Description |
---|
Burks GA4 Series - Centrifugal Pump, Close Coupled, End Suction |
Materials of Construction |
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft: #303 Stainless Steel. Shaft Seal: Carbon Ceramic SS Buna-N |
Motors |
Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting fl ange, one piece threaded stainless steel shaft and ball/ball bearing construction. |
Four Position Casing |
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. |
Enclosed Cast Iron Impeller |
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft. Impeller is available in bronze. |
Mechanical Shaft Seal Information |
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fl uids other than water. |
Factory Tested |
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards. |
Motor Information |
60 Hz - 3450 RPM - ODP Single Phase: 1/3 thru 2 HP - 115/230 Volt, 3 HP - 230 Volt Only Three Phase: 1/3 thru 3 HP - 208-230/460 Volt 50 Hz - 2900 RPM - ODP Single Phase: 110/220 Volt Three Phase: 380 Volt |
Overload Protection |
All single phase ODP and Totally Enclosed motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty. |
Chillers / Hot Water Systems
9574 productsCooling Tower
11343 productsGeneral Water Services
9574 productsHVAC
9574 productsIndustrial Processes
10299 productsMunicipal Drinking Water
9574 productsSprinkler / Irrigation
10299 productsStay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.