• Burks 154G6-2-1/2-AB

Image shown may not be actual product

Burks

154G6-2-1/2-AB

0 reviews

Burks 154G6-2-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 1750 RPM, 1 1/2 Horsepower, ODP Motor Enclosure, Frame Size 145JM, 91 lbs.

$2,840.29

154G6-2-1/2-AB

Burks 154G6-2-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 1750 RPM, 1 1/2 Horsepower, ODP Motor Enclosure, Frame Size 145JM, 91 lbs.

Adapter MaterialBronze
Capacities (GPM)960
Casing MaterialBronze
Casing Working Pressure200
Discharge NPT (Inches)2.5
Heads To (Feet)380
HP1.5
Hz60
Impeller MaterialBronze
Impeller Size (Inches)5.75"
Inlet Pressure (PSI)100
MaterialAll Bronze
Maximum Operating Temperature225°F (107°C) - Standard Buna-N Seal
Motor Enclosure TypeODP - Open Drip Proof Enclosure
Motor Frame Size145JM
Motor Shaft MaterialSteel
PhaseSingle Phase
Shaft Seal MaterialCarbon / Ceramic / SS Buna-N
Speed (RPM)1750
Suction NPT (Inches)3
Voltage115/230

G6-2-1/2 Series Information

General Description
Burks G6-2-1/2 Series - Centrifugal Pump, Close Coupled
Materials of Construction
Adapter - Bronze Fitted: Cast Iron, All Bronze: Bronze, All Iron: Cast Iron.
Casing - Bronze Fitted: Cast Iron, All Bronze: Bronze, All Iron: Cast Iron.
Casing Wear Ring - Bronze Fitted: Bronze, All Bronze: Bronze, All Iron: Steel.
Shaft - Steel
Shaft Sleeve - Bronze Fitted: Bronze, All Bronze: Bronze, All Iron: #316 S. Steel.
Impeller - Bronze Fitted: Bronze, All Bronze: Bronze, All Iron: Cast Iron.
Shaft Seal: Carbon Ceramic SS Buna-N
Motors
The standard Type JM motors supplied with these pumps offer the advantages of quiet operation, controlled shaft deflection for longer mechanical seal life and bearings sized to provide good service life. All motors are supplied by manufacturers providing field service facilities.
Casing Wear Ring
Prevents wear on casing and is easy to replace.
Mechanical Shaft Seal Information
Mechanical Shaft Seal is self-adjusting for temperatures up to 225°F (107°C) and pressures to 150 psi (1034kpa). Has ceramic seat and carbon seal faces for long trouble-free service. Special seals are available for higher temperatures and fluids other than water. Tapped opening is provided in the seal chamber for flushing seal faces.
Factory Tested
After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards.
Enclosed Bronze Impeller
Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation. Precision fit to shaft and double-locked with key and cap screw.
Jacketed Seal Cavity
All models, with the exception of the G7-2-1/2 and all G9 series pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "MJ" to pump catalog number for temperatures below 400°F (204°C) and add suffix "MJK" to pump catalog number for temperatures over 400°F (204°C). Example: G6-1-1/2MJ. See Section on High Temperature Pumps for more information.
Radial Split Casing Design
Casing is close grain iron of 30,000 p.s.i. minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump.
Interchangeability
The complete liquid end of any size pump is interchangeable between motors on close-coupled pumps and the BURKS power frames of comparable size providing inventory flexibility, plus an option for handling emergency service.

Categories

0 Reviews

Add a Review

You need to sign in to add a review.

TypeTitleLink

Burks Series G6-2 1/2Centrifugal Pump Datasheet

View

Burks Series G6-2 1/2 Centrifugal Pump Manual

View

G6-2-1/2 Burks Parts Breakdown Exploded View

View

Repair Parts for 154G6-2-1/2-AB

KeyPart NoDescriptionQtyshippingprice
0 items selected.Add items to cart

HD Product Demos & More

Stay tuned for releases of new product reviews and videos on our YouTube channel!

Secure Online Shopping

We take your privacy and security serious. Feel safe when shopping in our online marketplace.

  • Burks
  • LMI
  • Berkeley
  • Grundfos
  • Goulds

Still have questions?Call our Pump Hotline at 1-800-810-1053

sign up and save.

Some content