• Burks T330G6-1-1/4-AI-MV

Image shown may not be actual product

Burks

T330G6-1-1/4-AI-MV

0 reviews

Burks T330G6-1-1/4-AI-MV Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 3500 RPM, 3 Horsepower, TEFC Motor Enclosure, Frame Size 56J, 67 lbs.

$1,319.76

Item: T330G6-1-1/4-AI-MV
  • Overview
  • Series Info
  • Reviews
  • Literature/Manuals
  • Repair Parts

T330G6-1-1/4-AI-MV

Burks T330G6-1-1/4-AI-MV Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 3500 RPM, 3 Horsepower, TEFC Motor Enclosure, Frame Size 56J, 67 lbs.

Adapter MaterialCast Iron
Capacities (GPM)80
Casing MaterialCast Iron
Casing Working Pressure200
Discharge NPT (Inches)1.25
Heads To (Feet)135
HP3
Hz60
Impeller MaterialCast Iron
Impeller Size (Inches)5.5"
Inlet Pressure (PSI)100
MaterialAll Iron
Maximum Operating Temperature400°F (204°C)
Motor Enclosure TypeTEFC - Totally Enclosed Fan Cooled Enclosure
Motor Frame Size56J
Motor Shaft Material303 Stainless Steel
PhaseThree Phase
Shaft Seal MaterialViton®
Speed (RPM)3500
Suction NPT (Inches)1.5
Voltage208-230/460

G6-1-1/4 Series Information

General Description
Burks G6-1-1/4 Series - Centrifugal Pump, Close Coupled, End Suction
Materials of Construction
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze.
Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze.
Casing Wear Ring - All Iron: Steel, Bronze Fitted: Bronze, All Bronze: Bronze.
Shaft - #303 Stainless Steel
Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze, All Bronze: Bronze.
Shaft Seal: Carbon Ceramic SS Buna-N
Motors
Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.
Four Position Casing
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.
Casing Wear Ring
Prevents wear on casing and is easy to replace
Easy To Service
Taking out only 4 cap screws allows removal of pumping assembly without disturbing piping
Mechanical Shaft Seal Information
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.
Factory Tested
After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards.
Motor Information
60 Hz - 3500 RPM - ODP
Single Phase:
1/3 thru 2 Hp. - 115/230 Volt
3 Hp. - 230 Volt only
Three Phase:
1/3 thru 3 Hp. - 208-230/460 Volt
50 Hz - 2900 RPM - ODP
Single Phase: 110/220 Volt
Three Phase: 380 Volt
Overload Protection
All single phase ODP (Open Drip PRoof) and TEFC (Totally Enclosed Fan Cooled) motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty.
Enclosed Bronze Impeller
Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation and threaded onto stainless steel motor shaft.
Radial Split Casing Design
FOR TEMPERATURES TO 500°F (260°C). Series G5-1-1/4 & G6-1-1/4 Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "MJ" to pump catalog number for temperatures below 400°F (204°C) and add suffix "MJK" to pump catalog number for temperatures over 400°F (204°C). Example: G5-1-1/4-MJ. See Section on High Temperature Pumps for more information.

Categories

0 Reviews

Add a Review

You need to sign in to add a review.

TypeTitleLink

Burks Series G6-1 1/4 Centrifugal Pump Datasheet

View

Burks Series G6-1 1/4 Centrifugal Pump Manual

View

Burks Series G5 1.25_G6 1.25 Centrifugal Pump Parts

View

Repair Parts for T330G6-1-1/4-AI-MV

KeyPart NoDescriptionQtyshippingprice
0 items selected.Add items to cart

HD Product Demos & More

Stay tuned for releases of new product reviews and videos on our YouTube channel!

Secure Online Shopping

We take your privacy and security serious. Feel safe when shopping in our online marketplace.

  • Burks
  • LMI
  • Berkeley
  • Grundfos
  • Goulds

Still have questions?Call our Pump Hotline at 1-800-810-1053

sign up and save.

Some content