Image shown may not be actual product

10G5-1-1/4-AB-ME

0 reviews

Burks 10G5-1-1/4-AB-ME Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 56J, 47 lbs.

$2,442.00

Best Price Guarantee!
488PumpPoints

Item: 10G5-1-1/4-AB-ME

Repair Parts Exploded View Diagram

Overview
Series Info
Reviews
Literature/Manuals
Repair Parts

10G5-1-1/4-AB-ME

Burks 10G5-1-1/4-AB-ME Centrifugal Pump, Close Coupled, 60 Hz, Single Phase, 3500 RPM, 1 Horsepower, ODP Motor Enclosure, Frame Size 56J, 47 lbs.

Adapter Material	Bronze
Capacities (GPM)	80
Casing Material	Bronze
Casing Working Pressure	200
Discharge NPT (Inches)	1-1/4"
Heads To (Feet)	135
HP	1
Hz	60
Impeller Material	Bronze
Impeller Size (Inches)	4.25" (4 1/4")
Inlet Pressure (PSI)	100

Material	All Bronze
Motor Enclosure Type	ODP - Open Drip Proof
Motor Frame Size	56J
Motor Shaft Material	303 Stainless Steel
Phase	1 Ph (Single Phase)
Shaft Seal Material	EPT
Speed (RPM)	3500
Suction NPT (Inches)	1-1/2"
Voltage	115/230

G5-1-1/4 Series Information

General Description
Burks G5-1 1/2 Series - Centrifugal Pump, Close Coupled, End Suction
Materials of Construction
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing Wear Ring - All Iron: Steel, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft - #303 Stainless Steel Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft Seal: Carbon Ceramic SS Buna-N
Motors
Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.
Four Position Casing
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.
Casing Wear Ring
Prevents wear on casing and is easy to replace
Easy To Service
Taking out only 4 cap screws allows removal of pumping assembly without disturbing piping
Mechanical Shaft Seal Information
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.
Factory Tested
After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards.
Motor Information
60 Hz - 3500 RPM - ODP Single Phase: 1/3 thru 2 Hp. - 115/230 Volt 3 Hp. - 230 Volt only Three Phase: 1/3 thru 3 Hp. - 208-230/460 Volt 50 Hz - 2900 RPM - ODP Single Phase: 110/220 Volt Three Phase: 380 Volt
Overload Protection
All single phase ODP (Open Drip Proof) and TEFC (Totally Enclosed Fan Cooled) motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty.
Enclosed Bronze Impeller
Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation and threaded onto stainless steel motor shaft.
Radial Split Casing Design
FOR TEMPERATURES TO 500°F (260°C). Series G5-1-1/4 & G6-1-1/4 Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "MJ" to pump catalog number for temperatures below 400°F (204°C) and add suffix "MJK" to pump catalog number for temperatures over 400°F (204°C). Example: G5-1-1/4-MJ. See Section on High Temperature Pumps for more information.

0 Reviews

Add a Review

You need to sign in to add a review.

Type	Title		Link
	Burks Series G5-1 1/4 Centrifugal Pump Datasheet		View
	Burks Series G5-1 1/4 Centrifugal Pump Manual		View
	Burks Series G5 1.25_G6 1.25 Centrifugal Pump Parts		View

View the manual

Repair Parts for 10G5-1-1/4-AB-ME

Key	Part No	Description	Qty	shipping	price

0 items selected.Add items to cart

back to site

10G5-1-1/4-AB-ME

10G5-1-1/4-AB-ME