Image shown may not be actual product

EC10M-AB

0 reviews

Burks EC10M-AB Turbine Pump, Base Mounted, 1750 RPM, ODP Motor Enclosure, 70 lbs.

$5,991.75

Best Price Guarantee!
1198PumpPoints

Item: EC10M-AB

Repair Parts Exploded View Diagram

Overview
Series Info
Reviews
Literature/Manuals
Repair Parts

EC10M-AB

Burks EC10M-AB Turbine Pump, Base Mounted, 1750 RPM, ODP Motor Enclosure, 70 lbs.

Casing Material	Bronze
Casing Working Pressure	200
Frame Material	Bronze
HP	5
Impeller Material	Bronze w/ Monel Blades
Inlet Pressure (PSI)	50
Material	All Bronze
Maximum Operating Temperature	225°F (107°C) - Standard Buna-N Seal

Motor Enclosure Type	ODP - Open Drip Proof
Motor Shaft Material	303 Stainless Steel
Raceway Material	Bronze
Shaft Seal Material	Carbon / Ceramic / SS Buna-N
Speed (RPM)	1750
Strainer Material	Bronze (Brass Screen)

EC ED Series Information

General Description
Burks EC & ED Series - Regenerative Turbine Pumps, Base Mounted
Materials of Construction
Power Frame - Bronze Fitted: Cast Iron, All Bronze: Bronze Casing - Bronze Fitted: Cast Iron, All Bronze: Bronze Strainer - Bronze Fitted: Cast Iron (Brass Screen), All Bronze: Bronze (Brass Screen) Impeller - Bronze Fitted: Bronze (Monel Blades), All Bronze: Bronze (Monel Blades) Raceway: Bronze Fitted: Bronze, All Bronze: Bronze Shaft: #303 Stainless Shaft Seal: Carbon Ceramic SS Buna-N
Mechanical Shaft Seal Information
The leakproof mechanical shaft seal for temperatures to 225°F (107°C), is self-adjusting. A wide variety of mechanical seals are available for handling liquids other than water.
Factory Tested
Every pump factory tested for capacity, head and power consumption.
Jacketed Seal Cavity
Series EC & ED Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fl uids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix “J” to pump catalog number for temperatures below 400°F (204°C) and add suffix “JK” to pump catalog number for temperatures over 400°F (204°C). Example: EC6MJ.
Interchangeability
Interchangeability Chart Catalog No. \| Replaces \| Catalog No. \| Replaces EC4M E16M ED8M E23M EC5M EC17M ED9M E24M EC6M E18M ED10M E25M EC7M E19M ED11M E26M EC8M E20M ED12M E27M EC9M E21M ED14M E29M EC10M E22M
Power Frames
Power frames are supplied with grease lubricated ball bearings. Wide bearing spacing provides solid shaft support. Tapped and plugged openings are conveniently located for easy relubrication of power frame. Grease relief holes prevent over-lubrication.
Impeller Information
The bronze impeller, with monel metal blades secured in slots in the liquid channel by means of a brazing process, is the only moving part. Annular grooves or sealing rings are machined in the face of the impeller. These grooves are perfectly matched with corresponding grooves in the raceway and intermesh without metal to metal contact to form a labyrinth seal.
Raceway Information
The bronze raceway is the mating part to the impeller. Sealing grooves are machined into the face of the raceway to match the impeller sealing grooves reducing water slippage to a minimum, resulting in better efficiencies, while reducing the possibility of vapor bind.
External Adjustment
The adjusting screw is located in the power frame on Independent Pumps. A positive pre-load spring pressure is applied to the pump shaft bearing and in turn, is transmitted to the adjusting screw. This controlled pressure eliminates bearing end-play and provides a means for external adjustment of the clearance between the impeller and raceway. The distinct advantage of this exclusive BURKS feature is the positive means provided to establish the initial clearance between the impeller and raceway, plus providing a means for external readjustment to compensate for any possible wear between these parts. The customer benefit of this exclusive feature is the fact that readjustment can be made without disassembling the pump or disturbing the piping.
Casing Information
Casing is close grain iron of 30,000 PSI minimum tensile strength. Should the pump require service there’s no need to disturb the piping - the casing stays in the line.
Self Priming
Once casing is filled with water - will handle water, air or a mixture of both to high pressure.

0 Reviews

Add a Review

You need to sign in to add a review.

Type	Title		Link
	Burks Series EC Closed Coupled Turbine Pump Datasheet		View
	Burks Series EC Turbine Pump Manual		View
	Burks EC / ED Series Parts Breakdown Exploded View		View