Image shown may not be actual product

T3204DF6-2-1/2-AB

0 reviews

Burks T3204DF6-2-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 1750 RPM, 2 Horsepower, TEFC Motor Enclosure, Frame Size 145JM, 91 lbs.

Call for Pricing

Best Price Guarantee!

Item: T3204DF6-2-1/2-AB

Repair Parts Exploded View Diagram

Overview
Series Info
Reviews
Literature/Manuals
Repair Parts

T3204DF6-2-1/2-AB

Burks T3204DF6-2-1/2-AB Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 1750 RPM, 2 Horsepower, TEFC Motor Enclosure, Frame Size 145JM, 91 lbs.

Adapter Material	Bronze
Capacities (GPM)	320
Casing Material	Bronze
Casing Working Pressure	200
Discharge NPT (Inches)	2-1/2"
Heads To (Feet)	39
HP	2
Hz	60
Impeller Material	Bronze
Impeller Size (Inches)	5.625" (5 5/8")
Inlet Pressure (PSI)	100

Material	All Bronze
Maximum Operating Temperature	225°F (107°C) - Standard Buna-N Seal
Motor Enclosure Type	TEFC - Totally Enclosed Fan Cooled
Motor Frame Size	145JM
Motor Shaft Material	Steel
Phase	3 Ph (Three Phase)
Shaft Seal Material	Carbon / Ceramic / SS Buna-N
Speed (RPM)	1750
Suction NPT (Inches)	3
Voltage	208/230/460

DF6-2-1/2 Series Information

General Description
Burks DF6-2 1/2 Series - Centrifugal Pump, Close Coupled, End Suction
Materials of Construction
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft Sleeve - All Iron: #316 Stainless Steel, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft Seal: Carbon Ceramic SS Buna-N
Shaft Sleeve Information
Gasketed and keyed hook-type sleeve protects shaft from wear and corrosion in seal area.
Motors
JM Type motors have NEMA standard mounting flange, extended steel shaft and dual bearings. These motors offer the advantages of quiet operation, controlled shaft deflection for longer seal life, and bearings sized to provide good service life. All motors are supplied by manufacturers with national field service facilities.
Four Position Casing
Discharge can be located in any of four positions. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.
Enclosed Impeller
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation. It is precision fit to shaft with key drive and cap screw lock.
Mechanical Shaft Seal Information
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.
Factory Tested
After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards.
Motor Information
60 Hz - 1750 RPM - ODP 50 Hz - 1450 RPM - ODP Single Phase: 115/230 V Three Phase: 208-230/460 V
Overload Protection
All single phase ODP (Open Drip Proof) and TEFC (Totally Enclosed Fan Cooled) motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty.

0 Reviews

Add a Review

You need to sign in to add a review.

Type	Title		Link
	Burks Series DF6-2 1/2 Centrifugal Pump Datasheet		View
	Burks Series DF6-2 1/2 Centrifugal Pump Manual		View
	DF6-2-1/2 Series Parts Breakdown Exploded View		View

View the manual

Repair Parts for T3204DF6-2-1/2-AB

Key	Part No	Description	Qty	shipping	price

0 items selected.Add items to cart

back to site

T3204DF6-2-1/2-AB