Image shown may not be actual product
Burks 37DF4-1-1/4-AI Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 3450 RPM, 3/4 Horsepower, ODP - Open Drip Proof Enclosure, Frame Size 56J, 44 lbs.
Burks 37DF4-1-1/4-AI Centrifugal Pump, Close Coupled, 60 Hz, Three Phase, 3450 RPM, 3/4 Horsepower, ODP - Open Drip Proof Enclosure, Frame Size 56J, 44 lbs.
Adapter Material | Cast Iron |
Capacities (GPM) | 120 |
Casing Material | Cast Iron |
Casing Working Pressure | 200 |
Discharge NPT (Inches) | 1-1/4" |
Heads To (Feet) | 55 |
HP | 0.75 |
Hz | 60 |
Impeller Material | Cast Iron |
Impeller Size (Inches) | 3.5" (3 1/2") |
Inlet Pressure (PSI) | 100 |
Material | All Iron |
Maximum Operating Temperature | 225°F (107°C) - Standard Buna-N Seal |
Motor Enclosure Type | ODP - Open Drip Proof |
Motor Frame Size | 56J |
Motor Shaft Material | 303 Stainless Steel |
Phase | 3 Ph (Three Phase) |
Shaft Seal Material | Carbon / Ceramic / SS Buna-N |
Speed (RPM) | 3450 |
Suction NPT (Inches) | 1-1/2" |
Voltage | 208/230/460 |
General Description |
---|
Burks DF4-1 1/4 Series - Centrifugal Pump, Close Coupled, End Suction |
Materials of Construction |
Adapter - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Casing - All Iron: Cast Iron, Bronze Fitted: Cast Iron, All Bronze: Bronze. Impeller - All Iron: Cast Iron, Bronze Fitted: Bronze, All Bronze: Bronze. Shaft: #303 Stainless Steel. Shaft Seal: Carbon Ceramic SS Buna-N |
Motors |
Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting fl ange, one piece threaded stainless steel shaft and ball/ball bearing construction. |
Four Position Casing |
Centerline discharge can be located in any of four positions. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. |
Enclosed Impeller |
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft. |
Mechanical Shaft Seal Information |
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034kpa). Ceramic seat and carbon seal face for long troublefree service. Special seals are available for higher temperatures and fl uids other than water. |
Factory Tested |
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards. |
Motor Information |
60 Hz - 3500 RPM - ODP Single Phase: 115/230 Volt Three Phase: 208-230/460 Volt 50 Hz - 2900 RPM - ODP Single Phase: 110/220 Volt Three Phase: 380 Volt |
Overload Protection |
All single phase ODP and Totally Enclosed motors have built-in overload protection. All three phase motors and all explosion proof motors must be installed with a magnetic starter which provides full 3-leg protection. Failure to use correct starter and overloads will void motor warranty. |
Chillers / Hot Water Systems
9574 productsCooling Tower
11343 productsGeneral Water Services
9574 productsHVAC
9574 productsIndustrial Processes
10299 productsMunicipal Drinking Water
9574 productsSprinkler / Irrigation
10299 productsKey | Part No | Description | Qty | shipping | price |
---|
Stay tuned for releases of new product reviews and videos on our YouTube channel!
Check our Social Media for new product announcements and exclusive specials for our followers.
0 Reviews
Add a Review
You need to sign in to add a review.