back to site

Call us: 1-800-810-1053

LBC4SA-VHC3-XXX

Recently Viewed(1)
  • Pulsatron Pumps Model LBC4SA-VHC3-XXX Chemical Metering Pump
  • Pulsatron Pumps Model LBC4SA-VHC3-XXX Chemical Metering Pump Side View
  • Pulsatron Pumps Model LBC4SA-VHC3-XXX Chemical Metering Pump Back View

Image shown may not be actual product

Pulsatron

LBC4SA-VHC3-XXX

0 reviews

Pulsatron Model LBC4SA-VHC3-XXX Metering Pump, Series A Plus (A+), 48 GPD @ 50 PSI, Dual Manual Control, 115 VAC, PVC/HYP/C .50T

$457.30

Item: LBC4SA-VHC3-XXX
  • Overview
  • Series Info
  • Reviews
  • Literature/Manuals

LBC4SA-VHC3-XXX

Pulsatron Model LBC4SA-VHC3-XXX Metering Pump, Series A Plus (A+), 48 GPD @ 50 PSI, Dual Manual Control, 115 VAC, PVC/HYP/C .50T

Accessories• KOP Kits • Gauges • Dampeners • Pressure Relief Valves • Tanks • Pre-Engineered Systems • Process Controllers
Connections / Discharge (Inches)Tubing 1/2" OD
Connection TypeTubing
DiaphragmPTFE faced CSPE
Discharge NPT (Inches).38" x .50"
Flow ControlManual Control, Analog Adjustment
Flow Rate LPH7.6
GPH Flow Limitations (250 SPM)3.26-20
Head / FittingsPVC (Polyvinyl Chloride)
Hz60
IncludesA weighted foot valve/strainer assembly, a bleed valve assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 4' bleed/return tubing, 8' discharge tubing and Owners Manual.
Liquid End ConfigurationPVC / CSPE / Ceramic
Maximum Flow (GPD)48
Maximum Flow (GPH)2
Maximum Pressure (PSI)50
Maximum Strokes Per Minute125
Maximum Viscosity (CPS)1000
OptionsStandard Pump - No Additional Options
Pressure Rating BAR3.3
Standard Valve Size3
Suction NPT (Inches).38" x .50"
Turn Down Ratio100:1
Valve BallsCeramic
Valve / Seat / O-RingCSPE
Viscocity1000 up to 3000 cps w/ SS balls
Voltage115

A Plus Series Information

Features & Benefits
Dual Manual Control: Stroke frequency and stroke length are manually adjustable. 100:1 max turndown.

Pulsatron Series C Plus (C+) Chemical Metering Pump by Pulsafeeder

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Reliable metering performance.
• Rated "hot" for continuous duty.
• Leak-free, sealless, liquid end.
General Description
Pulsafeeder PULSAtron Series A Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series A Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series A Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of our high quality solenoid and special enclosure that effectively dissipates heat. Agency Approved and water resistant for demanding outdoor and indoor applications.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Engineering Data - Materials
Pump Head Materials: GFPPL, PVC, PVDF, 316 SS
Diaphragm: PTFE-faced CSPE-backed
Available Seat O-Rings: PTFE, CSPE, Viton
Available Ball Types: Ceramic, PTFE, 316 SS, Alloy C
Available Fitting Material: GFPPL, PVC, PVDF
Bleed Valve: Same as fitting and check valve selected (except 316 SS)
Available Tubing: Clear PVC, White PE

Important Material Codes:
GFPPL = Glass-filled Polypropylene
PVC = Polyvinyl Chloride
PE = Polyethylene
PVDF = Polyvinylidene Fluoride
PTFE = Polytetrafluoroethylene
CSPE = Generic formulation of Hypalon, a registered trademark of E.I. DuPont Company.
Viton is a registered trademark of E.I. DuPont Company.
PVC wetted end recommended for sodium hypochlorite.
Controls
• Manual Stroke Rate
• Manual Stroke Length
• External Pacing - Optional
• External Pace with Stop (125 SPM Only)
Control Options
Available Control Options:

• Manual Control
• External pace with Auto Manual Switch
• Stop Fucntion Option
• External Pace with Stop (125 SPM Only)
• Manual Control (S2, S3 & S4 Sizes Only)

*Check Model Number Codes and Configuration Options
Engineering Data - Tech
Reproducibility: +/- 3% at maximum capacity
Viscosity Max CPS: 1000 CPS
Stroke Frequency Max SPM: 125
Stroke Frequency Turn-Down Ratio: 10:1
Stroke Length Turn-Down Ratio: 10:1

Power Input:
115 VAC / 50-60 HZ / 1 Phase
230 VAC / 50-60 HZ / 1 Phase

Average Current Draw:
@ 115 VAC / Amps: 0.6 Amps
@ 230 VAC / Amps: 0.3 Amps

Peak Input Power: 130 Watts
Average Input Power @ Max SPM: 50 Watts
Chemical Compatibility
Liquid End Code / Chemical

PHC - AMMONIA, 10%, CITRIC ACID, 10 - 20%, SODIUM HYDROXIDE, 0 - 50%, SODIUM SILICATE, SODIUM SULFATE, SODIUM SULFIDE
ATS - DEAE - Steamline Treatment
PTC - FERRIC SULFATE, HYDROCHLORIC ACID, 0 - 37%, LACTIC ACID, POTASSIUM CHLORIDE, POTASSIUM PERMANGANATE SODIUM BI-CARBONATE, SODIUM BI-SULFATE, SODIUM CARBONATE, SODIUM NITRATE, SULFURIC ACID, 0 - 10%, SULFURIC ACID, 10 - 75%
PTT - FLUOSILICIC ACID, HYDROFLUOSILICIC ACID, 20%
KTT - HYDROCHLORIC ACID, 37 - 100%
PVC - NITRIC ACID, 0 - 20%,
VVC - SODIUM HYPOCHLORITE
KTC - PHOSPHORIC ACID, 0 - 100%, SULFURIC ACID, 95 - 100%

Categories

0 Reviews

  • ☆
  • ☆
  • ☆
  • ☆
  • ☆

Add a Review

You need to sign in to add a review.

TypeTitleLink

Pulsatron Series A Plus Electronic Metering Pump Brochure

View

Pulsatron Series A Plus Electronic Metering Pump Datasheet

View

Pulsatron Series A Plus Electronic Metering Pump Product List

View

Pulsatron Series A Plus Electronic Metering Pump Parts

View
0 items selected.Add items to cart

HD Product Demos & More

Stay tuned for releases of new product reviews and videos on our YouTube channel!

Secure Online Shopping

We take your privacy and security serious. Feel safe when shopping in our online marketplace.

  • Burks
  • LMI
  • Berkeley
  • Grundfos
  • Goulds

Still have questions?Call our Pump Hotline at 1-800-810-1053

sign up and save.

Some content